User`s manual

OEM User’s Manual 9
1.4.3 Europe
The marking shall include as a minimum:
• the name of the manufacturer or his trademark;
• the type designation;
• equipment classification, (see below).
NOTE: Manufacturers are recommended to declare the classification of their devices in
accordance with Table 2 and EN 300 440-2 [5] clause 4.2, as relevant. In particular,
where an SRD that may have inherent safety of human life implications, manufacturers
and users should pay particular attention to the potential for interference from other
systems operating in the same or adjacent bands.
Regulatory Marking
The equipment shall be marked, where applicable, in accordance with CEPT/ERC Rec-
ommendation 70-03 or Directive 1999/5/EC, whichever is applicable. Where this is not
applicable, the equipment shall be marked in accordance with the National Regulatory
requirements.
The RCM5600W has been tested and found to comply with:
• EN 300 328 v1.7.1
• EN 301 489-1 v1.8.1
• EN 301 489-17 v1.3.2 standards.
1.4.4 Japan
Both the RCM5600W and RCM5650W modules are certified for use in Japan under Arti-
cle 2-1-19. The Acceptance Number is 003WWA090869.
Receiver
Class
Risk Assessment of Receiver Performance
1
Highly reliable SRD communication media, e.g., serving human life
inherent systems (may result in a physical risk to a person).
2
Medium reliable SRD communication media, e.g., causing
inconvenience to persons that cannot be overcome by other means.
3
Standard reliable SRD communication media,e.g., inconvenience to
persons that can simply be overcome by other means.