User`s manual

112 MiniCore RCM5600W
E.2.1 Headers
The Serial Communication accessory board has a header socket at J2 for physical connec-
tion to other boards above it, and a header socket at J12 on the bottom side to connect to
boards below it. J2 and J12 are 2 × 25 SMT header sockets with a 0.1" pin spacing.
Figure E-3 shows the layout of another board to be plugged into the Serial Communica-
tion accessory board — this footprint is identical for the Prototyping Board and the two
accessory boards. The values are relative to the mounting hole.
Figure E-3. MiniCore Boards Footprint
(0.6985)