User`s manual

104 MiniCore RCM5600W
D.2.1 Headers
The Digital I/O accessory board has a header socket at J2 for physical connection to other
boards above it, and a header socket at J12 on the bottom side to connect to boards below
it. J2 and J12 are 2 × 25 SMT header sockets with a 0.1" pin spacing. Figure D-3 shows
the layout of another board to be plugged into the Digital I/O accessory board — this foot-
print is identical for the Prototyping Board and the two accessory boards. The values are
relative to the mounting hole.
Figure D-3. MiniCore Boards Footprint
(0.6985)