User`s manual

OEM User’s Manual 97
C.2.1 Headers
The Prototyping Board has a header socket at J2 for physical connection to other boards
above it, and a header socket at J12 on the bottom side to connect to boards below it. J2
and J12 are 2 × 25 SMT header sockets with a 0.1" pin spacing. Figure C-3 shows the
layout of another board to be plugged into the Interface Board — this footprint is identical
for the Prototyping Board and the two accessory boards. The values are relative to the
mounting hole.
Figure C-3. MiniCore Boards Footprint
(0.6985)