User guide

Chapter 21 Specifications 99

FCC Part 15 Class A

Radio Frequency Interference (RFI) (FCC 15.105)

This equipment has been tested and found to comply with the limits for Class A digital devices pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment.

This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one

or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Length 13.33 centimeters

5.25 inches

Width 8.25 centimeters

3.25 inches

Height 1.90 centimeters

.75 inches

Weight .227 Kilos

8 ounces

Power Requirements for Extended Temperature Models

2-contact barrel

connector

+9 to +30 VDC 525 mA (max)

external power supply

Environmental

Ambient

temperature

-35 to 70 degrees Celsius

-31 to 158 degrees Fahrenheit

Relative humidity 5% to 90% non-condensing

Altitude 0 to 12,000 feet

0 to 3,658 meters

Mechanical