User guide

Supported Devices
Chapter 1 Introduction 9
Supported Devices
This manual provides information on the following Digi devices:
• Digi One RealPort
• Digi One IA RealPort
• PortServer TS 2
• PortServer TS 4
About This Guide
Purpose
This guide provides the following:
• Configuration and administration procedures
• Configuration examples
Audience
This manual is intended for the person responsible for configuring and administering Digi One/PortServer TS
2/4. It assumes that this person has experience configuring network devices and is familiar with networking
concepts.
Scope
This manual provides step-by-step instructions for configuring and administering Digi One/PortServer TS 2/4’s
main features. It does not address how to configure every option, provide complete information on commands, or
discuss hardware installation. These topics are covered in other documents in the Digi One/PortServer TS 2/4
library.
About Command Line Examples
In this manual, many command examples are broken up and placed on two lines of the manual. This is done to
control where the line breaks, making it as easy to read as possible. When this is done, the second line of the
command will be indented slightly, as shown below.
set menu range=6 t1="Console Management Menu" name="Console Management
Menu" m3="Connect to System 1" c3="connect 1" m4="Connect to System 2"
c4="connect 2"
Other Documents in the Library
Here is a list of the other documents in the library:
Access Resource CD Card
This card provides information on the contents of the Access Resource CD. It includes the CD mounting
instructions required to access the CD on many Unix systems.
Digi One/PortServer TS 2/4 Setup Card
This card, which comes in the Digi One/PortServer TS 2/4 package, provides a brief overview on the setup
process.