User guide

In This Chapter
Chapter 16 Configuring Users 73
Chapter 16 Configuring Users
In This Chapter
This chapter discusses how to configure users. It covers the following topics:
About Configuring Users...............................................................................................................73
Common User Features .................................................................................................................74
Configuring a User: Web Interface................................................................................................74
Configuring a User: Command Line Examples.............................................................................75
About Configuring Users
Although it is not required, the Digi One and PortServer TS 2/4 is often configured to accommodate the
requirements of particular users. Typical configurable user attributes include the following:
• Whether the user is required to supply a password
• Autoconnection attributes, such as the system to which the user should be automatically connected at login
• The interface the device presents the user, such as a menu or command line
• Whether the user has access to outbound ports
Note: For information on configuring PPP users, see "Configuring PPP" on page 29.
Configuration Methods
You can configure users in the following ways:
• With the set user command. See the set user command in the Digi One/PortServer TS Command Reference.
• With the web interface.