User guide

In This Chapter
Chapter 6 Configuring Ports for Terminals and Computers 26
Chapter 6 Configuring Ports for Terminals and Computers
In This Chapter
This chapter describes how to configure Digi One/PortServer TS 2/4 ports for terminal and computer
connections. It discusses the following topics:
"Configuring Ports for Terminals: Web Interface" .......................................................................26
"Configuring Ports for Terminals: Command Line" ....................................................................27
"About Computer Connections" ...................................................................................................28
Configuring Ports for Terminals: Web Interface
Use this procedure to configure a port from the web interface.
1. Access the web interface by entering the Digi One/PortServer TS 2/4 IP address in a browser’s URL window.
2. Log in to the Digi One/PortServer TS 2/4 as root.
The default password is dbps.
3. From the main menu, choose Configure > Ports.
4. To configure a port, do the following:
a. Choose the port from the port column.
b. Ensure that the Device type is set to Terminal.
c. Make changes to the configuration as required. Use the online help for information.
d. If you want to apply this configuration to multiple ports, choose Clone, select the ports for this configura-
tion, and then choose Continue.
e. Choose Submit.
5. To return to the main Ports menu, choose Ports from the Menu again.