User guide

Configuring Ports: Web Interface
Chapter 3 Configuring Ports for RealPort 17
documentation for more information.
Configuration Options
You can configure Digi One/PortServer TS 2/4 for RealPort from the command line or using the web interface.
For information on using the web interface, see "Configuring Ports: Web Interface" on page 17.
Configuring Ports: Web Interface
Use this procedure to configure a port from the web interface.
1. Access the web interface by entering the Digi One/PortServer TS 2/4 IP address in a browser’s URL window.
2. Log in to the Digi One/PortServer TS 2/4 as root.
The default password is dbps.
3. From the main menu, select Configure > RealPort.
A screen similar to the following appears.
4. To complete configuration, choose Next and then follow the prompts.
5. To return to the main Ports menu, choose Ports from the Menu again.
6. To complete RealPort setup, install and configure the RealPort driver. See the appropriate RealPort setup
guide on the Access Resource CD.