User guide

In This Chapter
Chapter 2 Configuring the IP Address 12
Chapter 2 Configuring the IP Address
In This Chapter
This chapter discusses how to configure the Digi One/PortServer TS 2/4’s IP address and other features
associated with its Ethernet interface. It discusses the following topics:
Options for Configuring the IP Address and Mask .......................................................................11
Configuring the Ethernet Interface with Digi Port Authority-Remote..........................................12
Configuring the IP Address Using ARP-Ping ...............................................................................13
Configuring the Ethernet Interface from the Command Line........................................................13
Configuring an IP Address using DHCP and RARP.....................................................................14
Options for Configuring the IP Address and Mask
Options
The Digi One/PortServer TS 2/4 IP address can be configured using the following methods:
• With Digi Port Authority-Remote, a Digi utility
• By updating the ARP table on a server and then pinging the Digi device (called ARP-Ping)
• From the command line using the set config command
• Using a RARP server
• Using a DHCP server
The IP address and mask can also be changed using the web interface. This method, however, does not work for
the initial IP address configuration.