Technical data

PortServer Terminal Server Page 77
Procedure 8: Checking LED Indicators: OFC On?
Use this procedure when an OFC indicator light is on when monitoring a PortServer port.
1. From a terminal attached to the port, enter:
control-Q
2. From the PortServer, enter:
kill tty=portnumber
where portnumber is the port number of the port to which the terminal is connected.
3. If OFC is still on, enter the following at the PortServer command line prompt:
who
If the Connected from column shows other items such as IP address, make sure that the
originating system process is disabled.
If in either case, the lights are still on, return to and continue with the Master
Troubleshooting Process.