Technical data

Page 50 Command Reference

onlcr=on|off

Use to map (ON) or not to map (OFF) NEWLINE characters to CR-NEWLINE on

output. Default=off

otab=on|off

Converts output tabs to eight spaces. Default= off

parity=O|E|N

Use to select Odd, E

ven or No parity. Default=N (no parity).

range=startport#-endport#

Specify a range of ports to be modified.

save=on|off

Save the changes to EEPROM.

stopb=1|2

Use to set the Stop Bits to 1 or 2. Default=1

logins

Syntax: set logins option=value

Use this command to activate/deactivate login and password protection, define prompts and

startup messages. set logins range= is used to specify multiple ports, or one specific port.

Options are:

cmdprompt logprompt login write

passprompt passwd range save

verbose

Character Strings

Many of the values entered for logins are character strings. To include a space in a character

string, enclose the entire string in quotation marks. For example, to change the PortServer

set logins logprompt="Enter login:"

Each of the preceding will have their own options, as outlined in the following descriptions.

(More than one option can be included in a command.)