Technical data

Page 32 Command Reference
PortServer Commands
These commands are specific to the PortServer.
admin
Syntax: admin
The admin command allows you root privileges with the PortServer if you have previously
logged in as other than root. You will be asked for the root password.
boot
Syntax: boot action=reset|eewrite
The boot command is used to reboot the PortServer, and requires root privileges.
If the command is entered as boot action=reset, the PortServer is reset using the current
parameters stored in memory (as when first powered on).
Use boot action=eewrite to reboot the PortServer using the factory default settings stored
in ROM. Note that in this event all user configuration will be lost!
Seepage44forRemote Booting via TFTP (Trivial File Transfer Protocol) of up-
graded PortServer software.