Technical data

Page ii PortServer Terminal Server

PortServer Default Settings

Serial Parameters: (all ports) 9600 baud, No parity, 8 bits, 1 stop bit, VT100

terminal emulation

Root Login: root

Root Password: dbps

Digi, Digi International, PortServer, RealPort, and the Digi logo are trademarks or registered trademarks of

Digi International Inc. All other brand and product names are the trademarks of their respective holders.

Disclaimer

This manual may contain inaccurate or erroneous information. This manual is subject to change

at any time. This manual, including all information contained herein, is provided “as is” without

warranty of any kind, either express or implied, including, but not limited to, any implied

warrantees of merchantability or fitness for particular purpose. Digi International Inc. makes no

representations, warranties, or commitments with regard to any data or information contained in

this manual. If you rely on data or information contained in this manual, such reliance is at your

own risk.

RESTRICTED RIGHTS:

For non-U. S. Government use:

These programs are supplied under a license. They may be used, disclosed, and/or copied only as permitted

under such license agreement. Any copy must contain the above copyright notice and this restricted rights

notice. Use, copying, and/or disclosure of the programs is strictly prohibited unless otherwise provided in

the license agreement.

For U.S. Government use:

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in sub-paragraph

(c)(1)(ii) of the Rights in Technical Data and Computer Software clause of DFARS 52.227-7013.