User`s guide

Configure Physical Serial Ports
Chapter 5 Configure Ports 91
Manage port groups from the Port Menu
Once a port group is created and ports added to it, the Port Escape Menu
displays an additional command, g. (See "Port Escape Menu" on page 23 for
more details on accessing and using the Port Escape Menu.)
Port Menu:
b send break
l show last 100 lines of log buffer
a send message to port user
g port group 'Test Group'
x close current connection to port
To display the Port Group menu, enter g:
<Port Group 'Test Group'>
c send command to all ports
s switch to a port
l show last 100 lines of log buffer
To send commands to all ports in the same group, enter c.
To access any port in a group, enter s.
To check the last 100 lines of the log buffer, enter l. Make sure that port logging
is enabled to check last 100 lines of log buffer (see "Configure Port Logging"
on page 57). For example:
<Port Group 'Test Group'>
c send command to all ports
s switch to a port
l show last 100 lines of log buffer
Select a port to connect
( [*]1 4 10 )
-----> 1
>>> Log buffer is empty !
continue...