User`s guide

Configure Port Logging
Chapter 4 System Status and Port Logging 57
Configure Port Logging
If a serial port is configured for console server mode, the port logging
feature can be enabled. Port logging saves serial data to the memory of the
Digi Passport unit, a compact-flash card, a syslog server, or an NFS server.
If the memory is used for port logging, all data is cleared when the system’s
power is turned off. Alarm keywords can be defined for each serial port, for
sending email alerts or SNMP traps to enable unattended serial data
monitoring. To configure a serial port for port logging in console server
mode, follow these steps.
1. Enter the IP address of the Digi Passport unit in the address bar of a
web browser to access the web interface.
2. Under the Serial port heading, click Configuration.
3. Select All or the desired port number.
4. Click Advanced.
5. For the Port logging setting, select Enable.
6. The port logging settings are displayed.