User`s guide

Enable Log Storage Location
Chapter 4 System Status and Port Logging 51
Set Up Alert for NFS Server Disconnect
When the NFS server disconnects, an alert in the form of an email
message and/or an SNMP trap can be sent. To configure an alert, follow
these steps.
1. On the NFS Configuration screen, at the Email alert configuration,
select Enable.
2. Enter the Title of email and the Recipient's email address.
3. For an SNMP trap configuration, select Enable NFS disconnection
trap.
4. Select Enable for Use global SNMP configuration, and enter the IP
information for Trap receiver settings.
5. Click Save & apply.