User`s guide

Enable Log Storage Location
Chapter 4 System Status and Port Logging 50
3. Set or change the NFS Configuration parameters as needed:
• NFS service: Enabled or disabled.
• Primary NFS server name: IP address of NFS server or DNS
name.
• Mounting path on primary NFS server: Directory to primary NFS
server.
• Primary NFS timeout: Interval in seconds before timeout (5-3600).
• Primary NFS mount retrying interval: Interval in second between
attempts to connect (5-3600).
• Enable/Disable encrypted primary NFS server: If server supports
encrypted NFS server.
• Encrypted primary NFS server user: User name of server.
• Encrypted primary NFS server password: Password.
• Confirm Encrypted primary NFS server password: Re-enter the
password.
• Secondary NFS service: Enabled or Disabled.
• Secondary NFS server name: Name of server.
• Mounting path on secondary NFS server: Directory path to the
NFS server.
• Secondary NFS timeout (sec, 5-3600): Timeout, in seconds.
• Secondary NFS mount retrying interval (sec, 5-3600): Retry
interval, in seconds.
• Enable/Disable encrypted secondary NFS server: Specifies
whether the secondary server supports encrypted NFS server.
• Encrypted secondary NFS server user: User name.
• Encrypted secondary NFS server password: Password.
• Confirm secondary NFS server password: Re-enter the
password.
4. To activate NFS logging, select Enable.
5. Enter the IP address of the primary and secondary (if applicable) NFS
server and the mounting path of each.
6. Click Save & apply.