User`s guide

Add a Wireless LAN Card
Chapter 3 Install and Configure PC Cards 45
Add a Wireless LAN Card
To install and configure a wireless LAN card on the Digi Passport unit, do
the following.
1. Insert the card into the PC slot.
2. Enter the IP address of the Digi Passport unit in the address bar of a
web browser to access the web interface.
3. Under the PC card heading, click Configuration. The card is
automatically discovered and a configuration menu is displayed.
4. Click Configure the detected card.
5. Enter the appropriate parameters in the configuration menu.
WEP is the acronym for Wired Equivalent Privacy and is a security pro-
tocol for wireless LANs using encryption to protect data transfers. If the
settings for the wireless card are not known, contact the network admin-
istrator.
• SSID: Set Service Identifier and is the name of the wireless LAN
network.
• Use WEP key: Enable or disable the WEP key.
• WEP mode: Encrypted or unencrypted.
• WEP key length: If the WEP key is enabled, the options are 40 or
128 bits.
• WEP key string: Refer to the wireless network administrator for the
wireless encryption key string.
6. Click Save to flash.