User`s guide

Add a Network Card
Chapter 3 Install and Configure PC Cards 44
Add a Network Card
To install and configure a network card on the Digi Passport unit, do the
following.
1. Insert the card into the PC slot.
2. Enter the IP address of the Digi Passport unit in the address bar of a
web browser to access the web interface.
3. Under the PC card heading, click Configuration. The card is
automatically discovered and a configuration menu is displayed.
4. Enter the appropriate parameters in the configuration menu.
5. Click Save & apply.
If DHCP is active, the IP address will appear after Save & apply is
clicked.