User`s guide

Add a Compact-flash Card
Chapter 3 Install and Configure PC Cards 43
Add a Compact-flash Card
A PC card slot is located on the front panel of the Digi Passport unit. The
arrow in the following graphic indicates the PC card slot.
Important: Before removing a PC card, always click the Stop card service
button, then Save & apply.
To install and configure the compact-flash card on the Digi Passport unit:
1. Insert the card into the PC card slot.
2. Enter the IP address of the Digi Passport unit in the address bar of a
web browser to access the web interface.
3. Under the PC card heading, click Configuration.
4. Click Configure the detected card. These settings are displayed.
• ATA/IDE Fixed Disk Card configuration
• Total data size to be used: Enter the amount of memory to assign
to the compact-flash card for configuration files.
• Delete all files in ATA/IDE Fixed Disk Card: Click Delete to clear
the compact-flash card of all files.
• Format ATA/IDE Fixed Disk Card: The options are EXT2 or FAT
formats. If it is necessary to format the card, select this option and
click the Format button.
5. Click Save to flash or Save & apply.
PC card slot
Digi Passport 32 shown