User`s guide

Reset the Digi Passport unit to Factory Defaults
Chapter 18 System Administration 297
Using the Web Interface
The web interface provides the option of retaining the IP settings. To use
the web interface to reset the Digi Passport unit, do the following:
1. Enter the IP address of the Digi Passport unit in the address bar of a
web browser to access the web interface.
2. Select System administration > Configuration management
3. Under Configuration import, select Factory default.
4. From the list, select the Configuration factory default options to restore.
5. Click Import. The Digi Passport unit automatically reboots.
From the Command Line Interface
From the CLI, entering factory_reset performs the same action as using
the factory reset button.
Values Established through Factory Reset
When the Digi Passport unit is reset to the factory defaults, these values
are established:.
• Static IP Address: 192.168.161.5
• Port Access Menu IP Address: 192.168.1.100
• Port Access Menu TCP Port Number: 7000
• Serial Port IP Address: 192.168.1.101-
• Serial Port TCP Port Number: 7001-