User`s guide

Important File Locations
Chapter 17 Command Line Interface 281
Important File Locations
The Digi Passport unit has several files that are important for administrative
use. This section lists and briefly describes some of the files that the root
user or system administrator may wish to view, monitor, and edit.
Default Script
The default script file is executed whenever the Digi Passport unit is
booted. The file is /usr2/rc.user and can be modified with the vi editor. The
modified script becomes effective when the system is rebooted.
Booting Sequence
When the Digi Passport unit boots, it decompresses the /cnf/cnf.tar.gz file
to /tmp/cnf/* and unmounts the /cnf file. If the configuration files are
modified in the /tmp/cnf file and the configuration is saved to flash
(saveconf), the unit mounts the /cnf file and compresses the /tmp/cnf/* to
/cnf/cnf.tar.gz.
Config Files
Configuration (Config) files for the most part reside in subdirectories of
tmp/cnf. Config files include:
File Name Description
/.ssh SSH public key files. The format of key files is
name_auth_key2.
active_detect Active port detection configuration.
passive_detect Passive port detection configuration.
rportcon Remote port configuration.
./cluster_p2p Directory for peer-to-peer clustering
cluster.cnf Basic cluster information.
./cluster_p2p/cluster_p2p.cnf Basic peer-to-peer cluster information.
unit#.cnf Basic slave information.
/etc
client.pem
Web Certificate
dhcpd.opt DHCP certificate file.
group User group information.
hostname Passport host name.
hosts Name resolution hosts file.
interfaces Basic loopback (lo) and Ethernet interface (eth0,
eth1) info (Ip, gateway, etc).
ip6tables.save IPv6 IP access
iptables.save IPv4 access