User`s guide

Access the Web interface

Chapter 2 Getting Started 27

Access the Web interface

There are two ways to access the web interface.

• Using Digi’s device discovery tool, ADDP (Advanced Digi Discovery

Protocol). This device discovery tool is used to find and launch the web

configuration and management interface. ADDP will work whether or

not the unit has an address assigned, and whether or not there is a

DHCP server on the network, it only requires that the ADDP software is

running on a computer on the same LAN segment as the Digi Passport.

Find the device and double-click it to access the web interface, or select

the device and click Configure network settings (on the left navigation

bar).

• By entering the IP address of the Digi Passport unit or its hostname

directly into the address bar of a browser. The IP address and DNS

server must already be set up.

Home Page for Web Interface

Once the web interface is accessed, the home page of the web interface

page is displayed after login:

User Interface Differences for End Users

For Passport end users, the only option available under

System administration is to change the user password. Users can also