User`s guide

Restore Factory Defaults
Chapter 16 Configuration Menu Interface 267
Restore Factory Defaults
There are two choices to restore the unit to its factory defaults: restoring all
factory defaults, or restoring all factory defaults except IP settings. To
restore the Digi Passport unit unit to the factory defaults:
1. Access the configuration menu.
2. Select System administration.
3. Select Configuration import.
4. Select Location.
5. Select Factory Default. The system will restore factory defaults, and
the unit will automatically reboot.
6. Use System Administration to save the configuration in case it needs to
be reloaded later or onto another system. See "Add and Configure a PC
Card" on page 241 for more information.