User`s guide

Dial-in Terminal Server Access
Chapter 16 Configuration Menu Interface 263
Dial-in Terminal Server Access
Individual serial ports on the Digi Passport unit can be configured for dial-in
terminal server access. To use dial-in terminal server access, an external
modem is attached to a serial port on the Digi Passport unit, then the serial
port is configured for dial-in terminal server mode. In the illustration below,
port 7 is configured for dial-in terminal server mode.
Terminal server mode makes a direct connection to a server.
To configure a serial port for a dial-in terminal server:
1. Access the configuration menu.
2. Select Serial port configuration.
3. Select an individual port number and then Host Mode Configuration.
4. Select Dial-in Terminal Server and configure the other configuration
parameters.
5. To return to the main menu, use the ESC key.
6. Select Save changes.