User`s guide

Dial-in Modem Access
Chapter 16 Configuration Menu Interface 262
Dial-in Modem Access
Individual serial ports on the Digi Passport unit can be configured for dial-in
modem access. To use dial-in modem mode, an external modem is first
attached to a serial port and then the serial port is configured for dial-in
modem access. In the illustration below, port 7 is configured for a dial-in
modem.
To configure a serial port for a dial-in modem, do the following:
1. Access the configuration menu.
2. Select Serial Port Configuration.
3. Select an individual port number and then Host Mode Configuration.
4. Select Host mode and then Dial-in modem.
5. To return to the main menu, use the ESC key.
6. Select Save changes.