User`s guide

Assign IP Settings from the Console Port
Chapter 2 Getting Started 25
This chapter covers basic configuration topics, including assigning IP
settings, accessing and navigating in the web interface, enabling secure
access with the web interface, accessing the unit through SSH, and user
administration: adding, editing, or removing users, managing user
accounts, and creating access lists.
Initial setup is described in the Quick Start Guide included with the product
packaging.
Assign IP Settings from the Console Port
To assign IP settings to Ethernet port #1 via the console port, follow these
steps. The default IP address is 192.168.161.5.
1. Connect the console port on the rear panel of the Digi Passport unit to a
serial port on a workstation using the supplied straight-through CAT5
cable and the appropriate console adapter packaged with the the Digi
Passport unit.
2. Configure a terminal emulation program, such as HyperTerminal, using
these settings:
• bps=9600
• data bits=8
• parity=none
• stop bits=1
• flow control=none.
3. Establish a connection to the console port of the Digi Passport unit and
press Enter to get a command prompt.
4. At the login prompt, log in as admin. The default password for admin is
admin. The Configuration menu is displayed.
Chapter 2
Getting Started
Console port