User`s guide

Port Access Menu
Chapter 16 Configuration Menu Interface 243
Port Access Menu
Another default menu is the Port Access Menu, which is available to all
users.
1. Access the configuration menu.
2. Select Serial Port Configuration.
3. Select 0 for all ports.
4. Select Port access menu configuration.
Access this menu through a Telnet or SSH session using the IP address of
the Digi Passport unit followed by the port number 7000 as in the following
example:
telnet 192.168.100.200 7000
By default, the root user is connected to the command line interface and
the preceding option allows the root user access to the port access menu.