User`s guide

Clustering push configuration
Chapter 15 Port Clustering 236
Clustering push configuration
Clustering push configuration is used to push the configuration of one
Passport (Push server) to the other Passport unit in the cluster. This can
facilitate initial configuration of multiple Passport units. Because of security
concerns, pushing configuration is only possible to the units which have
default root password (dbps). Also only the ADR and User configuration
can be pushed.
Clustering push configuration has two main configuration menus.
• Push server filtering configuration
• Push configuration
The Push server filtering configuration menu is used to set push server(s)
which can push its configuration (ADR and User configuration) to the unit. If
there is no server configured, any Passport unit in the cluster can push its
configuration to the unit. If the unit is set as clustering slave unit and is
already configured as a slave by a master clustering unit. The Push server
filtering configuration page will also show the IP address of master unit.
If the unit is set as clustering master unit, the Push server filtering
configuration page will not show the IP address of master unit menu.