User`s guide

Configure peer-to-peer Clustering
Chapter 15 Port Clustering 228
Configure peer-to-peer Clustering
Configure Peer-to-peer Mode
1. Access the Digi Passport unit through the web interface.
2. Select Configuration > Peer-to-Peer configuration.
3. Configure peer-to-peer mode settings:
• Peer-to-peer mode: select Enable.
• Peer-to-peer authentication method: Select authentication
method to be used.
Local authentication: this peer will continue to authenticate users
locally and independently of other peers.
Peer authentication: the first peer contacted will perform the
authentication.
• Peer-to-peer password (new)/(confirm): Peered units must share
the same password.
4. Click Save & apply.