User`s guide

Configure Master-Slave Port Clustering
Chapter 15 Port Clustering 227
Access the Cluster Ports
Connect to the slave port using the web interface, Telnet, or SSH client.
Either access the port access menu or custom menu of each slave device
or connect directly to each slave port.
From the Web Interface
1. Clustered Ports appear in the Web user interface, and can be sorted by
Port Title or Port Number. If there are more ports than will display on the
screen, use the Move To pager feature on the upper right of the Port
list.
2. To adjust the number of ports that display on a page, go to Network >
Webserver Configuration and adjust the Serial ports count on
connection page setting. See "Configure Authentication for the Web
Server" on page 152.
From the Command Line Interface
From the Ports Menu, select R to see a list of peered units or S to see a list
of Slave units.