User`s guide

Set Alarms and Thresholds
Chapter 14 Power Controller 195
Set Alarms and Thresholds
The Power Controller can be set to issue an alert via E-mail notification or
an SNMP trap when environmental conditions exceed specifications.
1. On the Power Controller Configuration page, click Alarms &
thresholds.
2. Enter the appropriate parameters. Select the condition(s) for an alert
and enter the information for the alert (E-mail or SNMP trap or select
both).
If multiple power management units are cascaded, the alarm threshold
is set for the sum of all outlets.
To set up an E-mail alert, a mail server is required. If the mail server has
not already been configured, see "Configure SMTP Alerts" on page 108.
If the SMTP server is not set up, the E-mail option is not available.
3. Click Save & apply.
4. Continue by configuring the outlets.