User`s guide

Rackable Systems Management Card Configuration
Chapter 12 Rackable® Systems Management Card 182
Rackable Systems Management Card Configuration
To configure the serial port to provide access to the Rackable Systems
Management console:
1. Access the Digi Passport unit’s web interface.
2. Select Serial Port > Configuration.
3. Select a port.
4. Select Host mode configuration. The Host mode configuration page
is displayed.
5. Set the Host mode to Console server.
6. Set the Rackable Systems Mgmt Card support to Enable.
7. Click Save & apply.
Configure Serial Port Communication Settings
1. From the menu, select Serial port parameters .
2. Adjust the settings as required. The defaults for the Rackable Systems
Management Card are identical to these of the Digi Passport unit:
Baud rate 9600
Data bits 8
Parity None
Stop bits 1
Flow control None
DTR behavior High when open
3. Click Save & apply.
Assign a Port Name
1. From the menu, select Port title.
2. Enter a port title.
3. Click Save & apply.