User`s guide

Configuration User Interface Options for Digi Passport
Chapter 1 Introduction 17
Command Line Interface
The command line interface can be accessed from a Telnet or SSH session
or from the console port. The root user always has access to this interface,
and the admin user can be granted read-only permission.
SNMP
An SNMP MIB to configure the Digi Passport unit is available on the
Passport CD and can be downloaded from support.digi.com. To allow use
of this MIB, SNMP configuration must be enabled in the security profile. In
the Web interface, this is accomplished through the
System Administration > Security Profile section of the configuration
screen. See "Security Profile" on page 148 for more information