User`s guide

Access Windows Server 2003 Console Port from Digi Passport Unit’s GUI
Chapter 10 Microsoft SAC Support 167
Access Windows Server 2003 Console Port from Digi Passport Unit’s GUI
To access the Windows Server 2003 console port, do the following:
1. Enter the IP address of the Digi Passport unit in the address bar of a
web browser to access the web interface.
2. Select Serial port > Connection. A screen similar to the following is
displayed.
3. Click on the title of the port to which the Windows Server 2003 console
port is connected.
If support for "Windows Server 2003" and "Rackable Systems Manage-
ment Card" is selected, a menu for selecting one of the two functions is
displayed.
4. Use the Digi Passport unit’s GUI to perform SAC functions. The
following table describes attributes of the controls on the GUI.
Field Description
Connect Connects to the SAC console port via the command line interface.
Restart Reboots the Microsoft Server 2003.
Shutdown Shuts down the Microsoft Server 2003.
Caution: Selecting Shutdown switches off the server, meaning it can no longer be
accessed remotely.
Performance Displays to Microsoft Server 2003 status information.
Process Displays the process list, for viewing and killing active processes.
Serial Port
Log
Displays to port logging information.
IP Settings Displays IP settings, to verify and change settings as needed. However, the IP
settings are only temporary; they cannot be changed permanently through this
method