User`s guide

Add Menu Items
Chapter 9 Custom and Default Menus 160
Add Menu Items
1. Select Custom Menu > Configuration >menu name link for the menu
to configure.
2. Select Menu Items > Add Item. The Custom Menu Item Configuration
settings are displayed.
3. Fill in the desired parameters:
• Key: Assign any letter or number except a value already used by
another menu item.
• Label: Assign a label or name for the menu item.
• Create new submenu: Assign a name for a new submenu that this
menu item will be assigned or linked to.
• Go to existing submenu: Select an existing submenu from the
pulldown menu that this menu item will be assigned or linked to.
• Connect to serial port: Connects to a specified port.
• Connect to clustered serial port: Connects to a clustered port.
• Telnet to a remote host: A remote host’s IP address or host name.
• SSH (Secure Shell) to a remote host: Enter the host name or IP
address of a remote host and the remote username.
• Execute a custom command: A customized command, any valid
command on the command line with acceptable user privileges.
4. Click Apply.
5. To add more menu items, repeat this procedure. To add or configure
submenus, select Submenus on the Menu Configuration page.