User`s guide

Configure Authentication for the CLI
Chapter 8 Users, Security, and Authentication 156
Configuration for a Samba Server
On the Samba server
Make a shared folder to use a Windows machine for a Samba server. For a
Linux machine, run the smb service.
On the Digi Passport
1. In the Web interface, go to Network > Samba configuration.
2. Set Samba configuration values as follows:
• Samba service: Enable
• Samba server name: IP address or Computer name of Samba
server
• Mounting path on Samba server: shared folder name (should be
started with '/'. e.g. /share)
• Samba timeout (sec, 5-3600): 5 (this is a default value)
• Samba mount retrying interval (sec, 5-3600): 5 (this a default
value)
• Samba server user: User name of Samba server, if the Samba
server is a Windows server. The user name must be prefixed with
the domain, for example, "digi\username"
• Samba server password: Password of the user
The Samba directory will be mounted in the Digi Passport unit’s file system
in the /mnt/smb directory.