User`s guide

Discovering and Configuring the Digi Passport unit
Chapter 1 Introduction 14
Discovering and Configuring the Digi Passport unit
See the Quick Start Guide that came with the the Digi Passport unit to
connect the hardware and configure an IP address for the unit.
Alternatively, insert the Software and Documentation CD in your
computer’s CD drive, and select the Digi Device Discovery program. This
program uses the Digi-proprietary Advanced Digi Discovery Protocol
(ADDP) to discover all devices on a network. Once discovered, devices
can be viewed and configured. Start the program and click the correct
device to configure.
The Digi Device Discovery program knows the default password for the the
Digi Passport unit. If the password has been changed from the default,
dbps, a prompt for entering the password is displayed.
Configure the IP address. Once the Digi Passport is configured with a valid
IP address, log in to the Web user interface with username admin,
password admin.