User`s guide

Integrated Lights Out (iLO, iLO2)
Chapter 7 Service Processors 131
6. The Service processor configuration settings are displayed at the
bottom of the Serial port configuration page. Select Service
processor configuration. The Service processor configuration
settings are displayed.
Enter the Service processor configuration settings:
• Destination IP address: This is the IP of the iLO server.
• Destination port: The port used for HTTPS on the iLO server,
normally 443.
• User name: This is a user configured on the server with access to
iLO.
• Password: Supply and confirm the password for the above user.
Click Save and apply.