User`s guide

Integrated Lights Out (iLO, iLO2)
Chapter 7 Service Processors 130
Enter the remote port parameters as follows:
• Destination IP: The IP address of the server to monitor. Generally,
this is the IP address assigned to the iLO management channel.
• Destination port: Normally 22 for SSH or 23 for Telnet; the actual
port may vary on individual servers.
• Protocol: The Protocol to be used on the port normally this would
be SSH, but Telnet or RawTCP can be used if it is enabled on the
server.
• SMASH: Select to Enable or Disable.
• Allow unattended continuous connection: If enabled, when the
connection is lost, it is reestablished automatically. Enabling this
setting also enables the Automatic login setting and additional
login settings.
• Automatic login: whether the specified user should be
automatically logged in.
• User name. This is a user configured on the server with access to
iLO.
• Password: Supply and confirm the password for the specified user.
• Reestablishment interval value: The time, in seconds, after which
a lost connection will be reestablished. The default is 5 seconds.
Click Save to flash.