User`s guide

Integrated Lights Out (iLO, iLO2)
Chapter 7 Service Processors 129
Configure iLO and SMASH CLP on a Remote Port
To configure iLO including SOL (Serial Over LAN) and SMASH CLP on a
remote port, follow these steps.
1. In the Web interface, select Serial port configuration and select the
port to configure for iLO.
2. From the menu, select Advanced configuration.
3. In the next screen displayed, select Host mode configuration.
4. From the pulldown menu for Service processor, select iLO. Click
Save to flash.
5. Click Remote port parameters. Remote port parameters are
displayed: