User`s guide

Configure Port Event Handling
Chapter 6 Alerts and Notifications 117
Configure Port Event Handling
Once an SMTP or SNMP server has been configured, it can be used to
send port-related alerts and notifications. To configure a port for port event
handling, follow these steps. This procedure assumes that SMTP is
configured first. If not, see "Configure SMTP Alerts" on page 108.
1. Enter the IP address of the Digi Passport unit in the address bar of a
web browser to access the web interface.
2. Select Serial port > Configuration.
3. Select a port to configure, then Advanced configuration >
Port logging. The port logging settings are displayed.
4. For Port logging, select Enable.
5. For Logging direction, select which port events should be included in
the log and how they are displayed:
• Server output: Output from the server only.
• User input: User input only.
• Both with arrows: Both server output and user input, with arrows to
indicate direction.
• Both without arrows: Both server output and user input, without
direction indicator arrows.
6. Click Save & apply.