User`s guide

Configure SMTP Alerts
Chapter 6 Alerts and Notifications 108
Configure SMTP Alerts
Most SMTP servers check the sender’s email address with the host
domain name to verify the address as authentic. Consequently, when
assigning an email address for the device email address, any arbitrary
username with the registered hostname may be used. An example is
[e-mail].
To configure SMTP alerts on the Digi Passport unit, do the following:
1. Enter the IP address of the Digi Passport unit in the address bar of a
web browser to access the web interface.
2. Select Network > SMTP configuration.
3. Specify the SMTP settings as needed.
• SMTP server: Use either the hostname or the IP address.
• Device mail address: The sender’s email address for the log and
alarm delivery.
• SMTP mode: The type of SMTP server to use.
• Username and password: Required if using POP before SMTP
and SMTP with authentication servers.
4. Click Save & apply.