User`s guide

Configure Remote Ports
Chapter 5 Configure Ports 106
Access a Remote Port
To connect to a remote port using the web, Telnet or SSH client, use the port
access menu or a custom menu to simplify navigation.
• Web Access: Click Serial ports > Connection > port number.
Remote ports are sorted below the physical serial ports as the next avail-
able port number.
• Telnet to the IP and the port number. The specific port number is defined
on the ’Host mode configuration’ page. For example:
telnet 143.191.3.9 7051
• SSH to the IP address and port number. The specific port number is
defined on the Host mode configuration page.
• SSH to the IP address and port name. The specific port number is
defined on the Host mode configuration page. For example:
Ssh user-name:’t=port-title’@ip-Address
Ssh sunadmin:’t=Switch3level’:@MainDigi
A remote port can be accessed just like any local port: directly using the port
number.
The parameters of the remote port are equivalent to regular serial ports. Enter
any additional parameters for the remote and click Save & apply or
Apply all changes.