User`s guide

Configure Remote Ports
Chapter 5 Configure Ports 105
The remote port will now be displayed in the list of ports on the Ports con-
figuration page, under the heading Remote port configuration. For
example:
Advanced Remote Port Parameters
When remote ports are defined and selected, the Advanced port configuration
settings has a link, Remote port parameters. Parameters include:
• Destination IP address: The IP address of the remote device.
• Destination port (0-65535): The port number on the remote device.
• Protocol: The communications protocol used to communicate with the
remote device: Telnet, SSH, or RawTCP.
• Allow unattended continuous connection: Allow unattended
continuous connection: If enabled, when the connection is lost, it is
reestablished automatically. Enabling this setting also enables the
Automatic login setting and additional login settings. Default is Disable.
• Automatic login: Specifies whether a login to the remote device is
automatically performed. Enabling this setting displays the user login
settings. Default is Disable (no automatic login).
• User name. The user name to be used for the automatic login.
• Password: The password to be used for the automatic login. Supply and
confirm the password for the specified user.