User manual

27
Introduction
 Issue a new/changed password to
a user
Configuration > Security 160
Serial port configuration:
 Basic serial port settings
Configuration > Serial Ports > Basic Serial Settings 142
 Advanced serial port settings
Configuration > Serial Ports > Advanced Serial Settings 143
 Port profiles: associate a serial
port with a set of preconfigured
port settings for a specific use
Configuration > Serial Ports > Port Profile Settings 137
 RCI over serial mode
Configuration > Serial Ports > Advanced Serial Settings 143
 RTS Toggle
Configuration > Serial Ports > Advanced Serial Settings 143
 TCP serial connections
Configuration > Serial Ports > port > Port Profile Settings >
TCP Sockets port profile
139
 UDP serial characteristics
Configuration > Serial Ports > port > Port Profile Settings >
UDP Sockets port profile
140
Simple Network Management Protocol (SNMP):
 Configure SNMP through the
web interface
Configuration > System > Simple Network Management
Protocol (SNMP) Settings
153
 Enable/disable SNMP service
Configuration > Network > Network Services 82
 Enable/disable SNMP alarm
traps
Configuration > Alarms > alarm > Send SNMP trap to
following destination when alarm occurs
151, 152
Feature/task Path to feature in the web interface See page