User manual

25
Introduction
Mesh network:
 Mesh network configuration
through web UI
Configuration > Mesh Network 130
 Mesh network configuration
through Connectware Manager
170
 Mesh network monitoring/
management through web UI
Administration > System Information > Mesh Network
See also Connectware Manager’s Mesh Network view and
detailed view of network nodes
193
 Mesh network monitoring/
management through command
line
set mesh
display mesh
info zigbee_sockets
207
Mobile (cellular) settings:
 Provisioning CDMA cellular
modules
Configuration > Mobile
For Digi Cellular product that have a CDMA cellular module,
provisioning must be performed once.
To launch a wizard for provisioning the module, go to
Configuration > Mobile. Under Mobile Service Provider
Settings, click the Provision Device button.
Provisioning can also be performed from the command line:
 To display existing provisioning parameters:
“display provisioning” -- see "display" on page 30
 To provision the CDMA module: "provision" on page 59
121
 Mobile service provider and
connection settings
Configuration > Mobile
Settings displayed vary by mobile service provider.
120, 125
 SureLink™ Settings
Configuration > Mobile > SureLink Settings. 125
Feature/task Path to feature in the web interface See page