User manual

Configuration through the web interface
160
Alarms and the Connectware Manager server
All alarms can be sent to the Connectware Manager server for display and management
from that interface. See "Configure alarms" on page 149.
For more information on Connectware Manager
The Connectware Manager Operator’s Guide provides detailed information on
Connectware Manager features and tasks performed from the Connectware Manager
console.
Configure Security settings
Security settings involve several areas:
 User authentication: whether authentication is required for users accessing the
Digi device, and the information required to access it. You can choose to have
the user authentication be by username and password or by an SSH public key.
Depending on the Digi product, multiple users and their authentication
information can be defined. User authentication settings are on the Security
settings page.
 Network Configuration settings to further secure your device: Digi devices
with Cellular capability present additional security considerations, mainly
involving securing the border between the Digi device and the cellular network.
Several settings on the Network Configuration pages are available to further
secure the Digi device. For example, on the Network Services page, you can
disable unused network services. On the IP Filtering page, you can
allow
access from a specified devices and networks, and drop all other
connection attempts.