User manual

135
Configure Digi devices
Basic radio settings
 PAN ID: Sets the PAN (Personal Area Network) ID, in hex. This is the
preferred PAN ID for the mesh network. If the configured ID setting is FFFF,
the Digi device will select a random PAN ID. Otherwise, the specified ID will
be used.
When a Router or End device searches for a Coordinator on the mesh network,
it joins to a parent that has a matching PAN ID. If that device's configured ID
setting is FFFF, the device will join a parent operating on any PAN ID.
 Node Identifier: A printable string identifier of this node. This identifier is
returned as part of Node Discover command.
 Discover Timeout: Sets the amount of time a node will spend discovering
other nodes when a Node Join or Node Discover is issued.
 Scan Channels: A bit field list of the channels to scan. The Digi device
chooses of the channels when starting the network.
In a Router or End device, the bit field is a list of channels that will be scanned
to find a Coordinator/Router to join.
 Scan Duration: Sets the scan duration exponent of the Active and Energy
Scans (on each channel) that are used to determine an acceptable channel and
Pan ID for startup of the Coordinator.